Weldtite Jet Valve Inflator (Head only)

Description

• Prepare Your Equipment: Make sure you have the Weldtite Jet Valve Inflator and, if necessary, a CO2 cartridge ready.
• Locate the Valve Stem: Identify the valve stem on your bicycle tire or inner tube. It’s usually located near the rim and has a protective cap.
• Remove the Valve Cap: Take off the protective cap from the valve stem. Set it aside; you’ll need it again later.
• Secure Placement: Hold the Weldtite Jet Valve Inflator head securely in place.
• Inflation Process: Depress the trigger or lever to release the compressed air into the tire. Be careful not to over-inflate the tire; you should monitor the pressure and stop when the desired pressure is reached.
• Completion and Removal: Unscrew the jet valve from the valve stem when you’re finished.